Fix microphone feedback by reducing monitor volume, using headphones instead of speakers, or adjusting microphone polar pattern. This guide covers feedback causes for different microphone types and re
Work through these in order, the most common causes come first.
Feedback occurs when a microphone picks up its own output through speakers, creating a loop that amplifies until it produces a squeal.
Fix 1: Use headphones instead of speakers during recording or live use.
This completely eliminates the feedback loop.
Fix 2: If speakers are required, reduce speaker volume, increase microphone-to-speaker distance, or position the microphone so the speakers are in the microphone's null zone (the direction of minimum sensitivity, the rear of a cardioid microphone).
Higher ga in makes the microphone more sensitive and more likely to pick up speaker output at lower volumes.
Echo in video calls is not microphone feedback, it is the audio routing issue w here your voice exits the other person's speakers and re-enters their microphone.
Fix: ask the other person to use headphones.
Echo in calls is almost always caused by the call participant without headphones.
If you are the one causing echo: switch to headphones.
Headphones prevent your microphone from picking up the incoming audio.
HVAC, fans, ambient hum: use a gate or noise reduction plugin.
Microphone placement close to the sound source (6-8 inches) improves signal-to-noise ratio naturally.
Keyboard and desk noise: shock mount isolates from vibration; cardioid pattern rejects sounds from behind the microphone.
Reverberant room: acoustic treatment (panels on walls and ceiling) absorbs reflections.
A portable vocal booth or reflection filter mounted behind the microphone provides partial improvement.
Our picks
As an Amazon Associate I earn from qualifying purchases. Picks are based on manufacturer specs, independent reviews and owner reports.
Elgato
Elgato's newer all-metal boom arm that can rise above monitors or stay low.
Elgato
A low-profile boom arm that stays below eye level so it doesn't block your monitor or camera.
Hosa
Adequate noise rejection for home studio use at typical cable lengths (under 20 feet)
FAQ
Video call echo is almost always caused by the other person's microphone picking up your voice through their speakers and sending it back to you, or vice versa. The fix is headphones, headphones prevent your microphone from picking up the audio from your speakers. If you need to use speakers, reduce speaker volume and increase microphone distance from the speakers.
Omnidirectional microphones pick up sound from all directions, any room noise (fans, HVAC, keyboard, ambient sound) is captured. Cardioid microphones pick up primarily from the front and reject sound from the rear. For recording in a noisy environment, use a cardioid microphone positioned close to the sound source (6-8 inches from the mouth). Distance is the most effective noise reduction tool, the louder the source relative to the background noise at the microphone position, the better the signal-to-noise ratio.
Three solutions: 1) Use a shock mount to isolate the microphone from desk vibration (type noise transmits through the desk into the microphone stand). 2) Use a cardioid microphone positioned directly in front of the mouth with the keyboard behind or to the side, cardioid microphones reject rear and side noise. 3) Use a gate plug in in your audio software to suppress sound below a threshold when you are not speaking.
Keep researching
