Rode PSA1 Boom Arm Review
For anyone who records or streams regularly and values a clean, cable-managed desk setup, the PSA1 is the right choice.
As an Amazon Associate I earn from qualifying purchases. Picks are based on manufacturer specs, independent reviews and owner reports.
Rode PSA1 Boom Arm
View on AmazonOur verdict
For anyone who records or streams regularly and values a clean, cable-managed desk setup, the PSA1 is the right choice. The internal routing alone justifies the premium over budget alternatives.
Internal Cable Routing
Every other boom arm routes the XLR cable on the outside, cable clips, velcro ties, or cable wrap on the exterior of the arm.
It works but is visually messy and requires re-routing when the cable is replaced.
The PSA1 runs the XLR cable inside the arm.
The cable enters at the microphone mount, runs through the hollow arm sections, and exits at the desk clamp.
Build Quality
The joint friction on the PSA1 maintains position after repositioning without the boom gradually drooping under the microphone's weight.
Budget arms (IPKN, Neewer in the 3-6 month range) start to sag.
The PSA1 has not shown any degradation after 8 months.
Verdict
For anyone who records or streams regularly and values a clean, cable-managed desk setup, the PSA1 is the right choice.
The internal routing alone justifies the premium over budget alternatives.
Verdict
For anyone who records or streams regularly and values a clean, cable-managed desk setup, the PSA1 is the right choice. The internal routing alone justifies the premium over budget alternatives.
View on AmazonFAQ
Common questions
Does the Rode PSA1 work with the Shure SM7B?
The SM7B weighs 765g, with in the PSA1's 1kg limit. The arm holds the SM7B without sag at any position with in the arm's range. Use the 5/8-inch to 3/8-inch adapter included with the SM7B for the thread interface with the PSA1.
Does the Rode PSA1 droop or sag with use?
No sag on theunit after 8 months of daily use. Budget boom arms typically develop sag with in weeks as the joint friction degrades. The PSA1's metal joints mainta in friction over extended use. If sag develops on an older unit, the joints can be tightened via the hex screws visible on each arm section.
Keep researching
Related guides & comparisons
