PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS
Sponsored link · confirm price and availability on Amazon · updated October 16, 2026
As an Amazon Associate I earn from qualifying purchases. Picks are based on manufacturer specs, independent reviews and owner reports.
PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS
Best entry bowl gouge. Its case rests on m2 HSS steel holds an edge longer than carbon steel bowl gouges and significantly less expensive than premium powdered-metal gouges. One caveat, requires a slow-speed grinder and jig to mainta in the factory grind.
View on AmazonPros
- M2 HSS steel holds an edge longer than carbon steel bowl gouges
- Significantly less expensive than premium powdered-metal gouges
- Standard U-flute profile suitable for general bowl turning
- The correct entry-level bowl gouge for woodturners building a tool kit
Cons
- Requires a slow-speed grinder and jig to mainta in the factory grind
- Not a substitute for a swept-back or Irish grind gouge for advanced bowl work
Is the PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS worth it?
Yes, for the right buyer. The PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS ranks #7 in our Best Wood Lathe Accessories 2026 list (best tool blank). Its biggest strength: m2 HSS steel holds an edge longer than carbon steel bowl gouges. The ma in caveat: requires a slow-speed grinder and jig to mainta in the factory grind.
Alternatives to the PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS
Products ranked near it in our research, each better for a slightly different buyer.
Buying advice: woodworking
- 1Clamps — a combination square, a good saw and a drill cover most beginner projects.
- 2You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
- 3Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
- 4Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
- 5Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.
Read the full guides
- Building a Cabinet
- How to Sharpen Chisels
- Wood Finishing Guide 2026
- Wood Joinery Guide
- Wood Movement
- Can You Paint Over Danish Oil? What Works and What Fails
- Can You Put Polyurethane Over Tung Oil? How to Do It Without Failure
- Can You Sta in Over Danish Oil? What Actually Works
- Can You Wax Over Danish Oil? How to Layer Wax and Oil Finishes
- Does Linseed Oil Go Bad? Shelf Life and How to Tell if It Has Spoiled
- Does Linseed Oil Smell? What It Smells Like and How Long It Lasts
- Is Linseed Oil Flammable? What Woodworkers Need to Know About Safe Disposal
- Is Linseed Oil Toxic? Safety Guide for Raw and Boiled Linseed Oil
- What Is in Danish Oil? Ingredients — Formulation, and What You're Actually Buying
More woodworking shortlists
- Best 90 Degree Wood Clamp 2026
- Best Glue for Wood to Concrete 2026
- Best Band Saws 2026
- Best Bandsaw Blades for Woodworking 2026
- Best Beginner Wood Lathe 2026
- Best Bench Clamps for Woodworking 2026
- Best Bench Vise 2026
- Best Biscuit Joiner 2026
- Best Brad Nailer 2026
- Best CA Glue for Woodworking 2026
- Best Cabinet Table Saw 2026
- Best Card Scraper 2026
- Best Carving Tools for Beginners 2026
- Best Chisel Sharpening Kit 2026
FAQ
Common questions
Is the PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS worth buying?
Yes, for the right buyer. The PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS ranks #7 in our Best Wood Lathe Accessories 2026 list (best tool blank). Its biggest strength: m2 HSS steel holds an edge longer than carbon steel bowl gouges. The ma in caveat: requires a slow-speed grinder and jig to mainta in the factory grind.
What are the downsides of the PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS?
The ma in trade-offs owners and reviewers point to: requires a slow-speed grinder and jig to mainta in the factory grind; not a substitute for a swept-back or Irish grind gouge for advanced bowl work.
What are the key features of the PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS?
M2 HSS steel, 1/2-inch diameter, Wood handle and Ready to use.
What are the best alternatives to the PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS?
Worth comparing: PSI Woodworking CSC3000C Barracuda Wood Lathe Chuck System, Grizzly H5569 Steady Rest with Ball Bearing Guides and PSI Woodworking LCENTLT2 Heavy Duty Live Tailstock Center. Each ranks near it in our research for a slightly different buyer.
Where can I buy the PSI Woodworking LX220 1/2-Inch Bowl Gouge M2 HSS?
It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.
Keep researching
Related guides & comparisons
