Permatex 84145 Plastic Welder
Sponsored link · confirm price and availability on Amazon · updated October 16, 2026
As an Amazon Associate I earn from qualifying purchases. Picks are based on manufacturer specs, independent reviews and owner reports.
Permatex 84145 Plastic Welder
25-minute working time allows full repositioning before it sets
View on AmazonPros
- 25-minute working time allows full repositioning before it sets
- Fills gaps up to 3mm on rough or uneven fracture surfaces
- Sands and drills after cure for clean finishing
Cons
- Full strength requires 24 hours
- Mixing two parts adds steps
Is the Permatex 84145 Plastic Welder worth it?
Yes, for the right buyer. The Permatex 84145 Plastic Welder ranks #3 in our Best Glue for Plastic on Plastic 2026 list (best structural). Its biggest strength: 25-minute working time allows full repositioning before it sets. The ma in caveat: full strength requires 24 hours.
Alternatives to the Permatex 84145 Plastic Welder
Products ranked near it in our research, each better for a slightly different buyer.
Buying advice: adhesives
- 1Porous materials like wood — paper and fabric bond well with water-based glues. Non-porous ones like metal, glass and most plastics need epoxy, cyanoacrylate or a polyurethane adhesive. Polyethylene and polypropylene resist almost everything, so check the label lists them.
- 2Th in glues need parts that meet closely. If the joint is loose or the surfaces are uneven, epoxy or polyurethane glue fills the gap and still holds.
- 3Fast-setting glue is convenient for small fixes but leaves no time to adjust a big assembly. For furniture and glue-ups, a longer open time is worth more than speed.
- 4Standard PVA softens with moisture. For outdoor projects, cutting boards or anything washed often, look for a water-resistant (Type II) or waterproof (Type I) rating, or use epoxy.
- 5Once opened — super glue and some epoxies thicken with in months. Smaller bottles that you finish quickly often work out cheaper than a big one that goes off.
More adhesives shortlists
- Best Adhesive for Rubber to Rubber 2026
- Best Glue for Glass to Glass 2026
- Best Glue for Metals 2026
- Best Glue for Plastic on Plastic 2026
- Best Super Glue 2026
- Best Waterproof Adhesive for Plastic 2026
FAQ
Common questions
Is the Permatex 84145 Plastic Welder worth buying?
Yes, for the right buyer. The Permatex 84145 Plastic Welder ranks #3 in our Best Glue for Plastic on Plastic 2026 list (best structural). Its biggest strength: 25-minute working time allows full repositioning before it sets. The ma in caveat: full strength requires 24 hours.
Who is the Permatex 84145 Plastic Welder best for?
Based on our research it suits plastic on plastic 2026. It's ranked #3 of 11 in our Best Glue for Plastic on Plastic 2026 list.
What are the downsides of the Permatex 84145 Plastic Welder?
The ma in trade-offs owners and reviewers point to: full strength requires 24 hours; mixing two parts adds steps.
What are the key features of the Permatex 84145 Plastic Welder?
Two-part epoxy, 3,500 PSI strength, 25-minute work time and Gap filling.
What are the best alternatives to the Permatex 84145 Plastic Welder?
Worth comparing: Loctite Plastics Bonding System, Gorilla Super Glue Gel and Weld-On 16 Acrylic Adhesive. Each ranks near it in our research for a slightly different buyer.
Where can I buy the Permatex 84145 Plastic Welder?
It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.
Keep researching