Buying guides
● Woodworking · Review

Grizzly H3412 Cast Iron Faceplate, 4-Inch

Sponsored link · confirm price and availability on Amazon · updated October 16, 2026

✎ PickHonest Research Desk▦ Updated October 15, 2026◷ 5 min read

As an Amazon Associate I earn from qualifying purchases. Picks are based on manufacturer specs, independent reviews and owner reports.

Best Face Plate

Grizzly H3412 Cast Iron Faceplate, 4-Inch

Face plate is the most secure method for initial bowl blank mounting before a tenon is cut

View on Amazon

Pros

  • Face plate is the most secure method for initial bowl blank mounting before a tenon is cut
  • Screw directly to the blank bottom -- no tenon required for first cuts
  • 4-inch size is correct for most bowl blank sizes
  • Steel construction is more durable than aluminum face plates

Cons

  • Screw holes in the blank are wasted wood -- must be cut off later
  • Must order the correct thread for your lathe spindle

Is the Grizzly H3412 Cast Iron Faceplate, 4-Inch worth it?

Yes, for the right buyer. The Grizzly H3412 Cast Iron Faceplate, 4-Inch ranks #3 in our Best Wood Lathe Accessories 2026 list (best face plate). Its biggest strength: face plate is the most secure method for initial bowl blank mounting before a tenon is cut. The ma in caveat: screw holes in the blank are wasted wood -- must be cut off later.

Alternatives to the Grizzly H3412 Cast Iron Faceplate, 4-Inch

Products ranked near it in our research, each better for a slightly different buyer.

Buying advice: woodworking

  • 1Clamps — a combination square, a good saw and a drill cover most beginner projects.
  • 2You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  • 3Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  • 4Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  • 5Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

  • Building a Cabinet
  • How to Sharpen Chisels
  • Wood Finishing Guide 2026
  • Wood Joinery Guide
  • Wood Movement
  • Can You Paint Over Danish Oil? What Works and What Fails
  • Can You Put Polyurethane Over Tung Oil? How to Do It Without Failure
  • Can You Sta in Over Danish Oil? What Actually Works
  • Can You Wax Over Danish Oil? How to Layer Wax and Oil Finishes
  • Does Linseed Oil Go Bad? Shelf Life and How to Tell if It Has Spoiled
  • Does Linseed Oil Smell? What It Smells Like and How Long It Lasts
  • Is Linseed Oil Flammable? What Woodworkers Need to Know About Safe Disposal
  • Is Linseed Oil Toxic? Safety Guide for Raw and Boiled Linseed Oil
  • What Is in Danish Oil? Ingredients — Formulation, and What You're Actually Buying

More woodworking shortlists

  • Best 90 Degree Wood Clamp 2026
  • Best Glue for Wood to Concrete 2026
  • Best Band Saws 2026
  • Best Bandsaw Blades for Woodworking 2026
  • Best Beginner Wood Lathe 2026
  • Best Bench Clamps for Woodworking 2026
  • Best Bench Vise 2026
  • Best Biscuit Joiner 2026
  • Best Brad Nailer 2026
  • Best CA Glue for Woodworking 2026
  • Best Cabinet Table Saw 2026
  • Best Card Scraper 2026
  • Best Carving Tools for Beginners 2026
  • Best Chisel Sharpening Kit 2026

FAQ

Common questions

Is the Grizzly H3412 Cast Iron Faceplate, 4-Inch worth buying?

Yes, for the right buyer. The Grizzly H3412 Cast Iron Faceplate, 4-Inch ranks #3 in our Best Wood Lathe Accessories 2026 list (best face plate). Its biggest strength: face plate is the most secure method for initial bowl blank mounting before a tenon is cut. The ma in caveat: screw holes in the blank are wasted wood -- must be cut off later.

What are the downsides of the Grizzly H3412 Cast Iron Faceplate, 4-Inch?

The ma in trade-offs owners and reviewers point to: screw holes in the blank are wasted wood -- must be cut off later; must order the correct thread for your lathe spindle.

What are the key features of the Grizzly H3412 Cast Iron Faceplate, 4-Inch?

4-inch plate, Steel, Threaded and Multiple hole pattern.

What are the best alternatives to the Grizzly H3412 Cast Iron Faceplate, 4-Inch?

Worth comparing: Nova 48232 G3 Reversible Woodturning Chuck, PSI Woodworking PKMS1SET Pen Mandrel Saver Package and PSI Woodworking CSC3000C Barracuda Wood Lathe Chuck System. Each ranks near it in our research for a slightly different buyer.

Where can I buy the Grizzly H3412 Cast Iron Faceplate, 4-Inch?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

Keep researching

Related guides & comparisons

Delta Industrial 46-460 12-1/2-Inch Variable-Speed MIDI Lathe
ReviewDelta Industrial 46-460 12-1/2-Inch Variable-Speed MIDI LatheSponsored link · confirm price and availability on Amazon · updated October 16, 2026.
DeWalt DWHT16063 4-Piece Chrome Carbon-Steel Wood Chisel Set
ReviewDeWalt DWHT16063 4-Piece Chrome Carbon-Steel Wood Chisel SetSponsored link · confirm price and availability on Amazon · updated October 16, 2026.
DEWALT 15 Amp 8-1/4 Inch Compact Portable Jobsite Table Saw DWE7485
ReviewDEWALT 15 Amp 8-1/4 Inch Compact Portable Jobsite Table Saw DWE7485Sponsored link · confirm price and availability on Amazon · updated October 16, 2026.
BESSEY WS3 Angle Clamp
Best picksBest 90 Degree Wood Clamp 2026: 8 Corner Clamps for Square AssembliesOur top pick for 90 degree wood clamp is the BESSEY WS3 Angle Clamp (Cast aluminum body maintains true 90 degrees under clamping pressure -- plastic and…).
Liquid Nails LN-907 Extreme Heavy Duty Construction Adhesive
Best picksBest Glue for Wood to Concrete 2026: 8 Adhesives That Bond Wood to MasonryOur top pick for glue for wood to concrete is the Liquid Nails LN-907 Extreme Heavy Duty Construction Adhesive (3,500 PSI tensile strength is more than enough for framing and structural applications).