● Woodworking · Review

Freud 76-102 Down Spiral Bit, 1/4-Inch

Down-cut spiral pushes chips downward into the kerf -- keeps the workpiece surface clean

✎ PickHonest Research Desk▦ Updated October 15, 2026◷ 3 min read

As an Amazon Associate I earn from qualifying purchases. Picks are based on manufacturer specs, independent reviews and owner reports.

Freud 76-102 Down Spiral Bit, 1/4-Inch

Best Down Cut

Freud 76-102 Down Spiral Bit, 1/4-Inch

Freud

Down-cut spiral pushes chips downward into the kerf -- keeps the workpiece surface clean

Down-cut spiral
Pushes chips into the cut
TiCo Hi-Density carbide
Clean top surface

Pros

Down-cut spiral pushes chips downward into the kerf -- keeps the workpiece surface clean
The correct choice for plunge cuts in veneered plywood and laminate w here the top surface is visible
TiCo carbide construction for strong edge retention
Clean, crisp entry on the top face that an up-cut bit cannot match

Cons

Down-cut geometry is less efficient at chip removal -- more heat in the cut
Higher price than a comparable up-cut bit
Not ideal for deep cuts due to chip packing

Prices and availability change, so confirm on Amazon.View on Amazon

Appears in

Where the Freud 76-102 Down Spiral Bit, 1/4-Inch ranks

Freud 75-100 Up Spiral Bit, 1/8-Inch

Best picksBest Plunge Router Bits 2026: 8 Bits for Inside Cuts and Stopped GroovesOur top pick for plunge router bits is the Freud 75-100 Up Spiral Bit (Center-cutting end allows plunging directly into the surface without a pilot hole).

Freud 04-100 1/8-Inch Double Flute Straight Bit

Best picksBest Straight Router Bits 2026: 8 Bits for Dadoes, Grooves, and SlotsOur top pick for straight router bits is the Freud 04-100 1/8-Inch Double Flute Straight Bit (TiCo carbide is harder and stays sharper longer than standard carbide in straight bit…).

Freud 75-100 Up Spiral Bit, 1/8-Inch

ComparisonFreud 75-100 Up Spiral Bit vs Freud 76-102 Down Spiral BitBoth made our Best Plunge Router Bits 2026 shortlist, at #1 and #2.