Best Recliner Covers for Chairs and Loveseats

Our top pick is the Sure Fit Home Décor Stretch Pique Box Cushion Large Recliner Slipcover, Chocolate (best overall), because separately fitted seat cushion gives a closer, less-bunched fit around the recline joint than a single-piece cover. The runner-up is the CHUN YI Stretchable Recliner Cover 1-Piece, Ivory White, followed by the Subrtex Recliner Chair Cover, Small (seat width to 25"), Navy.

For most buyers, yes. It ranks #1 in our recliner covers for chairs and loveseats research, though lowest rating count (1,600) of the recliner covers here, less buyer feedback to confirm long-term fit.

A regular armchair or accent-chair slipcover is cut as one continuous shape assuming the chair does not change position. A recliner's footrest panel extends and the back panel reclines independently of the seat, so a cover needs either a separate footrest panel that is not sewn shut, or enough built-in slack and separate elastic points at the footrest, seat, and back to move with the mechanism without pulling loose or blocking the recline motion entirely. A standard armchair cover placed on a recliner typically works fine while the chair is upright but bunches, tears at the seams, or restricts the footrest from extending fully once the recline mechanism is engaged, since the fabric has now here to give at the joint between seat and footrest.

Measure the chair in its closed, upright position (footrest down, back upright), not extended. Take the seat width wall to wall across the front of the cushion, the total chair height from floor to the top of the backrest, and the depth from the front of the seat cushion to the back of the chair. Compare these three numbers against the size chart on the specific listing, since recliner cover sizing bands (commonly labeled small, standard/large, and oversized/wing) vary in their exact inch cutoffs between brands. A chair that measures right at a size boundary, for example 27 to 28 inches wide when the small size tops out at 27 and the large size starts at 28, generally fits better in the larger size band, since a snug recliner cover restricts the recline motion more than a slightly loose one does.

A properly sized recliner cover should not block the manual recline lever or the powered recline button on a power recliner, since most covers are cut with an opening or slit at the side panel specifically for handle or control access, and this is listed explicitly on well-designed products. That said, a cover that is undersized for the chair pulls tight across the mechanism and can add resistance to the recline motion, making it feel stiffer to operate, particularly on a footrest panel that already has limited slack. For a power recliner with a side-mounted control panel or plug for the motor, check that the specific cover has a cutout or side opening for the cord and control before buying, since not every recliner cover accounts for a power cord running through the frame.