As an Amazon Associate I earn from qualifying purchases. Picks are based on manufacturer specs, independent reviews and owner reports.
Our top picks
Short on time? Our top recommendation is the DEWALT DW7352-2 Planer Blades, Heat Treated, Double Sided, 13-Inch, 2-Pack.
Compare
At a glance
The traits that separate these picks, side by side.
| # | Product | Best for | Key feature | |
|---|
| 1 | | — | M2 laminated tool steel, double sided | Check ↗ |
| 2 | | — | Premium HSS steel | Check ↗ |
| 3 | | — | Indexable carbide inserts | Check ↗ |
| 4 | | — | High speed steel | Check ↗ |
| 5 | | — | High speed steel, pre-ground edge | Check ↗ |
| 6 | | — | High speed steel, investment cast | Check ↗ |
| 7 | | — | Precision angle guide | Check ↗ |
| 8 | | — | Solid carbide inserts, box of 10 | Check ↗ |
In depth
The 8 best, explained
Why each made the cut, where it falls short, and who should buy it.
Best OverallDeWalt
Double-sided M2 steel gives two usable edges before replacement
- M2 laminated tool steel, double sided
- Direct fit DW735/DW735X
- 2-pack (6 blades total)
- Machined locator holes
✓ Pros
- Double-sided M2 steel gives two usable edges before replacement
- Direct factory fit for the DW735/DW735X eliminates any adjustment guesswork
- Machined locator holes keep the cutterhead aligned during installation
- The most purchased replacement blade set for the most common benchtop planer
✕ Cons
- Only fits DeWalt DW735/DW735X and compatible models
- High speed steel, not carbide, so edge life is shorter than carbide options
Best ValueOSCARBIDE
Dual reversible edges give two usable cutting sides per blade
- Premium HSS steel
- Fits Jet 208, Powermatic 209, Grizzly G6702/G0454W
- Set of 4
- Dual reversible edges, precision ground
✓ Pros
- Dual reversible edges give two usable cutting sides per blade
- Direct fit for common 20-inch stationary planers (Jet 208, Powermatic 209, Grizzly G6702/G0454W)
- Priced well below dealer-branded replacement sets
✕ Cons
- Not carbide, so edge life is shorter than carbide options on hardwoods
- Only fits specific 20-inch planer/jointer models
Best Helical UpgradeByrd Tool
Converts a straight-knife benchtop planer into a helical cutterhead machine, dramatically reducing tearout
- Indexable carbide inserts
- 4-sided cutting edges
- Spiral cutterhead pattern
- Drop-in replacement
✓ Pros
- Converts a straight-knife benchtop planer into a helical cutterhead machine, dramatically reducing tearout
- Four usable cutting edges per insert before replacement is needed
- Spiral pattern cuts quieter and smoother than straight knives on figured or interlocked grain
✕ Cons
- Very high price relative to a simple replacement knife set
- Installation requires more mechanical confidence than swapping stock knives
Best BudgetPOWERTEC
Low price restores a budget planer's cut quality without a large investment
- High speed steel
- Direct fit AP1301
- Set of 2
- Pre-sharpened
✓ Pros
- Low price restores a budget planer's cut quality without a large investment
- Direct fit removes any guesswork on a common consumer planer model
- Pre-sharpened and ready to install out of the package
✕ Cons
- Shorter edge life than carbide blades on harder wood species
- Fits a narrower range of machines than universal blade sets
Best IndustrialFreud
Premium high speed steel holds a working edge well in production use
- High speed steel, pre-ground edge
- Multiple length options for industrial planers/jointers
- Limited lifetime warranty
- Precision ground
✓ Pros
- Premium high speed steel holds a working edge well in production use
- Available in multiple lengths to fit a wide range of industrial planer/jointer models
- Precision grinding gives a clean, consistent finish across the full cut width
✕ Cons
- Not carbide, so edge life is shorter than solid-carbide options on abrasive material
- Priced higher than generic aftermarket steel blades
Best For Stationary PlanersPowermatic
Factory-matched tolerances keep a stationary planer's cutterhead balanced and vibration-free
- High speed steel, investment cast
- Fits Powermatic Model 208/209 20-inch planers
- Set of 4
- Factory tolerance grind
✓ Pros
- Factory-matched tolerances keep a stationary planer's cutterhead balanced and vibration-free
- Direct fit for Powermatic's popular Model 208/209 20-inch stationary planers
- Consistent, repeatable finish quality expected from OEM replacement parts
✕ Cons
- Only fits Powermatic-specific cutterhead dimensions
- Priced significantly higher than generic aftermarket alternatives
Best Sharpening JigTormek
Restores a dull straight knife to a working edge instead of buying a full replacement set
- Precision angle guide
- Works with Tormek water-cooled sharpening systems
- Adjustable blade holder
- Sharpens virtually any blade length
✓ Pros
- Restores a dull straight knife to a working edge instead of buying a full replacement set
- Repeatable angle guide keeps the bevel consistent across multiple sharpenings
- Water-cooled grinding prevents overheating and edge damage during sharpening
✕ Cons
- Requires a Tormek sharpening system, a larger investment than a basic honing guide
- Not compatible with helical or indexable carbide cutterheads
Best Replacement InsertsByrd Tool
A box of 10 replaces only the inserts that are actually dull or chipped, instead of a full blade set
- Solid carbide inserts, box of 10
- 4 indexable cutting edges per insert
- Fits Byrd Shelix cutterheads
- Made in the USA
✓ Pros
- A box of 10 replaces only the inserts that are actually dull or chipped, instead of a full blade set
- Four cutting edges per insert before the insert itself needs replacing
- Low per-insert cost keeps a helical cutterhead running cheaply over its life
✕ Cons
- Only fits Byrd Shelix and compatible helical cutterheads
- Rotating individual inserts takes longer than swapping a single straight knife
What to check before you buy
These are the factors that separate planer blades. Match them to how you'll actually use it before comparing prices.
- Start with basics: Clamps — a combination square, a good saw and a drill cover most beginner projects.
- Clamps: You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
- Glue: Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
- Finishes: Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
- Safety: Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.
How we chose these picks
- We started from manufacturer specifications and feature lists, the verifiable foundation.
- We weighed reputable independent reviews from established tech and consumer publications.
- We read large volumes of verified-owner feedback to find patterns in reliability and satisfaction.
- We scored value: what you get for the price, not just absolute performance.
- We excluded products with thin — suspicious, or heavily incentivized review profiles.
We don't claim hands-on testing we haven't done. Assessments synthesize manufacturer specifications, reputable independent reviews and documented owner feedback. Read our methodology.
How to choose: the factors that matter
- Capacity and sizing — Measure your space and your actual use before falling for bigger-is-better. The right size is the one that fits your routine, not the spec sheet's maximum.
- Build quality and materials — Heavier-gauge materials, tight tolerances, and solid joints outlast thin, rattly construction. In reviews, look for longevity comments over first-impression praise.
- Ease of use and setup — Clear instructions, intuitive controls, and minimal assembly separate daily drivers from garage ornaments.
- Maintenance and cleaning — Whatever you buy will need cleaning. Removable, dishwasher-safe, or wipe-clean parts get maintained; fiddly ones get neglected.
- Warranty and support — A multi-year warranty signals the manufacturer expects it to last. Check what's actually covered, motors and frames matter more than accessories.
The bottom line
There's no single 'best' here, only the best match for your situation. Start from your must-have features, then choose the least expensive pick that covers them.
FAQ
Common questions
What are the best planer blades 2026 right now?
Our top pick is the DEWALT DW7352-2 Planer Blades, Heat Treated, Double Sided, 13-Inch, 2-Pack (best overall), because double-sided M2 steel gives two usable edges before replacement. The runner-up is the OSCARBIDE 20-Inch Planer Blades, 4-Piece Set for Jet 208, Powermatic 209, Grizzly G6702/G0454W (best value), followed by the Byrd Tool Shelix Cutterhead for DeWalt DW735 Planer.
What is the best budget option among planer blades 2026?
Our best-value pick is the OSCARBIDE 20-Inch Planer Blades, 4-Piece Set for Jet 208, Powermatic 209, Grizzly G6702/G0454W: dual reversible edges give two usable cutting sides per blade. Check the current price on Amazon, since deals change often.
Which of the planer blades 2026 should I buy?
It depends on what matters most to you. For overall, choose the DEWALT DW7352-2 Planer Blades, Heat Treated, Double Sided, 13-Inch, 2-Pack. For value, choose the OSCARBIDE 20-Inch Planer Blades, 4-Piece Set for Jet 208, Powermatic 209, Grizzly G6702/G0454W. For helical upgrade, choose the Byrd Tool Shelix Cutterhead for DeWalt DW735 Planer. For budget, choose the POWERTEC 13-Inch Planer Blades for Ryobi AP1301, Replacement for AC8630, Set of 2.
Is the DEWALT DW7352-2 Planer Blades, Heat Treated, Double Sided, 13-Inch, 2-Pack worth it?
For most buyers, yes. It ranks #1 in our planer blades 2026 research, though only fits DeWalt DW735/DW735X and compatible models.
Keep researching
Related guides & comparisons
